Prevent additional IP addresses from being registered in DNS

18 Oct

In Windows 7 and 2008 R2 all IP Addresses are by default registered in DNS.

If you don’t want certain IP addresses to appear in DNS you can alter this behavior with Netsh using the skipassource flag.

Use the following syntax to add an additional IP Address with skipassource flag:

netsh int ipv4 add address "Local Area Connection" address=10.250.1.19 mask=255.255.255.0 skipassource=true

1	netsh int ipv4 add address "Local Area Connection" address=10.250.1.19 mask=255.255.255.0 skipassource=true

If you want to check if the skipassource flag is set, you can use the following syntax:

netsh int ipv4 show ipaddresses level=verbose

Address 10.250.1.19 Parameters
---------------------------------------------------------
Interface Luid     : Local Area Connection
Scope Id           : 0.0
Valid Lifetime     : infinite
Preferred Lifetime : infinite
DAD State          : Preferred
Address Type       : Manual
Skip as Source     : true

Address 10.250.1.43 Parameters
---------------------------------------------------------
Interface Luid     : Local Area Connection
Scope Id           : 0.0
Valid Lifetime     : infinite
Preferred Lifetime : infinite
DAD State          : Preferred
Address Type       : Manual
Skip as Source     : false

netsh int ipv4 show ipaddresses level=verbose

Address 10.250.1.19 Parameters

---------------------------------------------------------

Interface Luid : Local Area Connection

Scope Id : 0.0

Valid Lifetime : infinite

Preferred Lifetime : infinite

DAD State : Preferred

Address Type : Manual

Skip as Source : true

Address 10.250.1.43 Parameters

---------------------------------------------------------

Interface Luid : Local Area Connection

Scope Id : 0.0

Valid Lifetime : infinite

Preferred Lifetime : infinite

DAD State : Preferred

Address Type : Manual

Skip as Source : false

Notes

You need either SP1 or Hotfix kb2386184.
If you change the IP settings from the GUI the skipassource flag is cleared (install Hotfix kb2554859).
See kb975808 for Vista and Server 2008.
See kb246804 for Windows 2000 and 2003.

Please consider donating something (even a small amount is ok) to support this site and my work:

Filed under: Windows 2008 R2, Windows 7

One Response for "Prevent additional IP addresses from being registered in DNS"

Ingmar Verheij – The dutch IT guy » Please wait for the Local Session Manager » Ingmar Verheij - The dutch IT guy October 20th, 2011 at 17:37 1
[…] KB2554859 is required.OR, you can issue the netsh command with the parameter skipassource=true as Remko Weijnen recently blogged.If you do not have access to the domain controller, or unable to appy hotfixes, or […]